Wholesale fuel filter A0004771302 fuel water separator

Short Description:

Send email to us

Product Detail

Product Tags

Size

Inner diameter 2 : 93.9mm

Height : 217.5mm

Seal Ring Diameter : 104.7mm

Shell Diameter : 108.6mm

Filter Implementation Type : Screw-on Filter

Recommended part numbers for special tools : -

Connector Thread : 1″x14

OEM

IVECO : 2997378

IVECO : 504142827

IVECO : 504143664

MERCEDES-BENZ : 0004770103

MERCEDES-BENZ : 0004771302

MERCEDES-BENZ : A0004770103

MERCEDES-BENZ : A0004771302

RENAULT : 7420754418

Cross reference

BALDWIN : BF1391-O

BOSCH : F 026 402 143

DELPHI : HDF303

DONALDSON : P551026

DT : 4.61865

DT Spare Parts : 4.61865

FLEETGUARD : FS19737

FLEETGUARD : FS19914

HENGST FILTER : H701WK

MAHLE ORIGINAL : KC 200

MANN-FILTER : WK 1080/7 x

MANN-FILTER : WK1080/7X

PURFLUX : CS780

RACOR : R160T

How to drain the fuel-water separator

There is a knob under the fuel-water separator, unscrew it until the gasoline comes out:

1. If there is water and impurities in the gasoline, the parts of the fuel system will corrode and rust due to the water in the fuel. Removing the water from the diesel oil is very important for the trouble-free operation of the fuel system and prolonging the service life;

2. The fuel-water separator is mainly based on the density difference between water and fuel oil, and uses the principle of gravity sedimentation to remove impurities and water. There are also separation elements such as diffusion cones and filters inside;

3. The fuel-water separator has other functions, such as pre-heating the fuel to prevent wax formation, filtering impurities, etc.

First find the fuel-water separator, and then look at the lower end of the fuel-water separator. There is a screw, which can be released by twisting the screw. The fuel-water separator is mainly based on the density difference between water and fuel oil, and uses the principle of gravity sedimentation to remove impurities and water. There are also separation elements such as diffusion cones and filters inside.

Unscrew the screw below the fuel-water separator to drain the water. The fuel-water separator has other functions, such as pre-heating the fuel to prevent wax formation, filtering impurities, etc., separating the oil and water from the fuel, and separating the water in the oil. , This has a certain effect on the engine to improve the oil burning. It is a kind of fuel filter, and its main function is to remove the moisture in the diesel oil, so as to reduce the failure of the fuel injector and prolong the service life of the engine.