Fuel water separator fuel filter 11110683 11110688 FS19737

Short Description:

Send email to us

Product Detail

Product Tags

OEM

11110683 11110688 FS19737 FS19914 P559118

Size

OD: 108mm

Thread: 1″-14

Height H: 219mm

The fuel-water separator is an instrument that separates oil and moisture. It is a separator that uses the principle of gravity sedimentation to remove impurities and moisture based on the density difference between water and fuel. There are also separation elements such as diffusion cones and filters inside.

Working principle

The compressed air fuel-water separator is composed of a shell, a cyclone separator, a filter element, and sewage components. When the compressed air containing a large amount of oil and water solid impurities enters the separator, it spins down along its inner wall, and the centrifugal effect produced causes the oil and water to separate out of the vapor stream and flow down the wall to the bottom of the oil-water separator, and then Then it is finely filtered by the filter element. Because the filter element is made of three kinds of coarse, fine and superfine fiber filter materials, it has a high filtration efficiency (up to 99.9%) and low resistance. When the gas passes through the filter element, the inertia collision due to the block of the filter element As well as the van der Waals force between molecules, electrostatic attraction and vacuum suction, it is firmly adhered to the filter material fibers, and gradually increases into liquid droplets, which drip into the bottom of the separator under the action of gravity, and are discharged by the drain valve. The main material of the catering wastewater grease trap is made of stainless steel, which is not easy to corrode and is durable.