products size

Outer Diameter 1 : 86 mm
Outer Diameter 2 : 95 mm
Inlet Diameter : 10 mm
Outlet Diameter : 10 mm
Height : 214 mm

Rotary fuel filter

The top of the fuel filter element has internal threads, and the filter tank is fixed on the threaded joint of the filter seat.

(1) Thoroughly clean the outer surface of the fuel filter assembly.

(2) Loosen the drain at the bottom of the filter and allow the water/fuel to drain into a suitable container. (3) Use a tape wrench or similar tool to loosen the canister, then remove the canister.

(4) Make sure that the threaded fitting is fastened to the filter seat and that the inside is clean.

NOTE: Some factory-assembled filter tanks have special sealant applied to the threaded fittings. Canisters are provided with an internal seal assembly instead. The sealant is held in place by glue clips. Failure to properly assemble the canister seal may result in damage to the fuel injection pump.

(5) Lightly lubricate the two seals on the top of the new canister with clean fuel. Install the new canister onto the filter holder and hand tighten only.

(6) Drain the air from the fuel filter

FAQ

Q1. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q2. How about your delivery time?

A: Generally, it will take 15 to 30 days after receiving your advance payment. If urgent, we could arrange to produce at about 10-15 days. If we have them in stock, we can deliver within 3-7 working days.The specific delivery time depends on the items and the quantity of your order.

Q3. What brand can you supply?

A: We have an independent export brand, include Milestone, CHNMST, Ruiqian, Jiasheng, Zahory etc. Meanwhile, customers’ own brand is acceptable after we obtaining customers’ brand authorization.