Mobile Phone
+86-13273665388
Call Us
+86-319+5326929
E-mail
milestone_ceo@163.com

Factory Oil Spin-on Filters 1012N-010 LF3349 for Engine Part

Short Description:


Place of Origin:CN;HUB
Certification:NO
OE NO.:LF3349
Size:OEM Standard Size
Car Model:Truck
Warranty:8000 Miles
Type:Oil Filter
Overall Height:176.28 mm
Largest OD:93.12 mm
Seam OD:93.73 mm
Gasket OD:71.98 mm
Warranty:6 Months
30 micron efficiency, TWA:95%
Packing:Neutral Packing
Car Make:Truck


Product Detail

Product Tags

Factory Oil Spin-on Filters 1012N-010 LF3349 for Engine Part

Applicable models: Cummins
Applicable engine: K50
Applicable equipment model: P126T1
No check valve No bypass valve

 

Common sense of good and bad filters

All filters protect the engine parts, clean and prolong the service life of the engine. From the surface of various filters and the length of use of the filters, it is not correct to determine the quality of the filters. The quality of the device should be considered first from the following aspects:
1. Filter paper quality
Good quality filter paper and poor quality filter paper are similar from the surface. Only by inspection under the inspection equipment of a professional factory, there can be obvious differences. The quality of filter paper is related to the efficiency of the filter. There are more impurities, iron and dust in the system, and the filter paper of poor quality filters impurities, iron and dust.
2. The filtration efficiency of the filter
It is mainly determined by the quality of the filter paper used in the filter. The filtration efficiency of the filter is more than 96% to be regarded as a qualified product. At the same time and in the same place, the use of filters from different manufacturers is different. The obvious difference is When the engine is started, during the driving process, the driver’s feeling of the engine and the smoke level of the car’s exhaust gas are significantly different when the engine is repaired and the parts are worn.
3. Filter paper and end cap bonding material
With good quality filter paper, there is also a good quality adhesive. If the selection is not appropriate, the filter paper in the filter will not be firmly bonded to the upper and lower end caps. When oil is encountered during use, it is easy to fall off and has no stickiness. Causes a short circuit and cannot filter.
4. Guarantee of production process.
From the surface, the filter paper and the filter paper cannot stick together. Transmittance must be seen in light. If there is no light transmission under the light, the adhesion of the filter paper will affect the flow of the entire filter, the life is short, resulting in insufficient power, physical, and difficult to remove dust during the cleaning process. A good filter is non-adhesive between filter papers, has strong light transmittance, is suitable for the recent standard of the engine, has a long service life, and is easy to clean.
5. Process of filter
Selecting high-quality materials to produce filters, the production process is the backing to ensure the quality of the products. There are many production links of the filter. How to ensure that the filter can protect and purify during use, and can ensure the flow and ensure the normal operation of the engine, requires the process guarantee of each link of the production process.

Contact Us

photobank






  • Previous:
  • Next:

  • Write your message here and send it to us