Engine air filter 6001811580 air filter for excavator 600-181-1580

Short Description:

Send email to us

Product Detail

Product Tags

How to change the air filter

Methods as below:

1. First, pull out the storage box of the co-pilot of the vehicle.

2. Pull out the fixed handle on the left side of the storage box.

3. Then take the buckle out of the handle.

4. Then push the storage box hard on both sides at the same time, so that the storage box can be taken out.

5. After that, you can see the air-conditioning filter element. Press the fixed buckle in the picture to take out the air-conditioning filter element.

6. After that, you can take out the filter element by pulling it out, and then replace it with a new filter element.

The precautions for replacing the air filter are as follows:

1. First, before opening the air filter plastic cover, we must determine how it is fixed. Is it fixed with screws or with clips. Second, make sure there are several screws or snaps. Do not recklessly remove the entire plastic cover after removing two screws or opening two snaps.

2. After removing the air filter element, be sure not to bend it. Many people are very curious when they dismantle something for the first time. There is nothing wrong with fiddling with the air filter in their hands, but don’t bend it.

3. In addition, after removing the air filter cover, do not place the screws arbitrarily. Keep all the screws together, preferably in a location where the screws are not easily scattered. For example, the small grooves in the engine compartment, etc., are all very good choices.

4. The last point is when installing the air filter, be sure to put the front and back of the air filter on the right side. And, when installing the screws, do not use too much force, so as not to loosen the screws.