OEM/ODM Supplier Hydraulic Return Filter - High quality and efficient 319435 Wind turbine gear oil tank lubricating oil wind turbine gearbox hydraulic oil filter element – MILESTONE

Effect

The function of the hydraulic filter is to filter various impurities in the hydraulic system. The main sources are mechanical impurities remaining in the hydraulic system after cleaning, such as rust, casting sand, welding slag, iron filings, paint, paint skin and cotton yarn scraps, etc., and impurities entering the hydraulic system from outside, such as through the oil filler and anti-corrosion. The dust entering the dust ring, etc.; the impurities generated during the working process, such as the debris formed by the hydraulic action of the seal, the metal powder generated by the relative wear and tear of the movement, the colloid, asphaltene, and carbon residue generated by the oil due to oxidation and deterioration.

Basic Information

Hydraulic filter

There are many ways to collect pollutants in fluids. Devices made of filter materials to capture pollutants are called filters. Magnetic filters that use magnetic materials to adsorb magnetic pollutants are called magnetic filters. In addition, there are electrostatic filters, separation filters and so on. In the hydraulic system, any collection of pollutant particles in the fluid is collectively referred to as a hydraulic filter. In addition to the method of using porous materials or wound fine gaps to intercept pollutants, the most widely used hydraulic filters are magnetic filters and electrostatic filters used in hydraulic systems.

After the above impurities are mixed into the hydraulic oil, with the circulation of the hydraulic oil, it will play a destructive role everywhere, seriously affecting the normal operation of the hydraulic system, such as making the small gap (measured in μm) between the relatively moving parts in the hydraulic components and the joints. The flow holes and gaps are stuck or blocked; the oil film between the relatively moving parts is destroyed, the surface of the gap is scratched, the internal leakage is increased, the efficiency is reduced, the heat is increased, the chemical action of the oil is aggravated, and the oil is deteriorated. According to production statistics, more than 75% of the failures in the hydraulic system are caused by impurities mixed in the hydraulic oil. Therefore, it is very important for the hydraulic system to maintain the cleanliness of the oil and prevent the pollution of the oil.

General hydraulic filter is mainly composed of filter element (or filter screen) and shell (or skeleton). The flow area of ​​the oil is composed of numerous tiny gaps or pores on the filter element. Therefore, when the size of impurities mixed into the oil is larger than these tiny gaps or pores, they are blocked and filtered out of the oil. Since different hydraulic systems have different requirements, it is impossible to completely filter the impurities mixed into the oil, and sometimes it is not necessary.