OEM/ODM Factory Excavator Filter Hydraulic - Wholesale 936E excavator 53C0658 hydraulic oil suction filter 53C0658 – MILESTONE

Cross Reference

What Is Hydraulic Filtration And Why Do You Need It?

Hydraulic filters protect your hydraulic system components from damage due to contamination of oils or other hydraulic fluid in use caused by particles. Every minute, approximately one million particles larger than 1 micron (0.001 mm or 1 μm) enter a hydraulic system. These particles can cause damage to hydraulic system components because hydraulic oil is easily contaminated. Thus maintaining a good hydraulic filtration system will increase hydraulic component lifetime.

Every Minute One Million Particles That Are Larger Than 1 Micron (0.001 Mm) Can Enter A Hydraulic System.
The wear of hydraulic system components is dependent on this contamination, and the existence of metal parts in hydraulic system oil (iron and copper are particularly powerful catalysts) accelerates its degradation. A hydraulic filter helps to remove these particles and clean the oil on a continuous basis. The performance for every hydraulic filter is measured by its contamination removal efficiency, i.e. high dirt-holding capacities.

A hydraulic filtration system includes hydraulic filters to remove dirt and particles on a continuous basis.
A hydraulic filter helps to remove these particles and clean the oil on a continuous basis. The performance for every hydraulic filter is measured by its contamination removal efficiency, i.e. high dirt-holding capacities. Almost every hydraulic system contains more than one hydraulic filter. The hydraulic filters between pump and actuators are referred to as pressure filters and the hydraulic filters between the actuators and tanks are low pressure or return line filters.