Factory making Fuel Filter - Replaced Mercury fuel water separating filter element 35-60494-1 for marine – MILESTONE

Filter replacement instructions:

Lubricate the O-ring with oil and cut the filter on the filter adapter;
Tighten the filter housing securely by hand;
Start the engine and check for leaks.

Use:

High-performance fuel-injected engines require ultimate water separation, fuel filtration, and maximum fuel flow. Milestone filter elements deliver all three of these critical performance factors and are engineered for today’s stern drives, inboards, and 2-cycle and 4-cycle outboards. Ethanol-blended fuels hold more water and can increase the chances of water in fuel tanks, resulting in premature wear, poor performance, and component damage. These fuel filters are designed to successfully remove 99% of the emulsified water found in fuels. Five Oceans filters have a 90% efficiency rate while maintaining fuel flow rates to meet the demands of modern high-performance engines.

Safety warning:

Check fittings and filter element periodically for tightness. Be careful when replacing the fuel filter element; gasoline is highly flammable and highly explosive under certain conditions. Avoid spilling gasoline. Always turn off the engine, do not smoke or allow open flames to appear when replacing the filter element.

Note:

It can not be used with the mixture of oil and gasoline of the 2-stroke engines. In case the mixture is made automatically on the outboard, it can be used with the fuel before it reaches the engine.

Service:

On our website you can place an order for the goods of the Xingtai Milestone manufacturer at competitive prices which in China. You can make a purchase of the goods Cartridge for the Xingtai Milestone 35-60494-1, S3213 fuel filter in any way necessary for you, for example, by writing to us Email info4@milestonea.com . Our will find the right solution for you from the Spare parts for fuel filters section. We offer transportation throughout the worldwide in the ways that suit you.